Coinvalidator RM5               

RM5                                                                                       X                                                                      nn

It identifies the type of                                       It identifies the type of                                            the type of

     token dispenser                                            mechanical set-up                                            configuration

                     V, F,G

Designed for the Gambling Market. Unique technological innovation combined with quality and affordability.

The coin validator is interfaced to the machine board via a serial line, as provided by CCTALK protocol. It therefore perfectly meets the cctalk protocol and the unmodifiability requirements of italian law 289.Unique technological innovation combined with quality and affordability confirmed by over 400,000 units in the marketplace.

It has been tested and approved by the main board manufacturers, both in Italy and abroad; it is therefore perfectly compatible with the most known models of boards currently produced on the market. It is equipped with two different connectors as required by CC TALK specifications to satisfy the widest connection requirements and it can drive 2 to 4 way sorters plus reject. 

RM5 X E0: Coinvalidator mode SPAGNA  

The parallel coin mechanism is used mainly in Spain. The coin identification gives a warning sign of acceptance and activation with confirmation.
Especially studied for the gambling market, puts together new technology. Already tried and tested by 400,000 models. Respects immodificable standards (law 326) and able to manage up to 4 different coins together with 2,3 or 4 way separators plus reject mechanism, or in alternative all exits free. Tried and tested by major board manufacturers, both in Italy and abroad so perfectly compatible with other board models already on the market.

RM5 X AT: Coinvalidator ModeSPAGNA mit Impulsen nach unterschiedlicher Zeit  

This coin validator uses the parallel mode. The validator gives a warning sign on the identification, by means of a differing time impulse for each coin type with a warning sign of acceptance activation also confirmation.
Especially studied for the gambling market, puts together new technology. Already tried and tested by 400,000 models. Respects immodificable standards (law 326) and able to manage up to 4 different coins together with 2,3 or 4 way separators plus reject mechanism, or in alternative all exits free.
Tried and tested by major board manufacturers, both in Italy and abroad so perfectly compatible with other board models already on the market.
 

RM5 X B0: Coinvalidator binary mode  

This binary coin mechanism is able to manage up to fifteen different money values, or 59 different coins if redirected into the first 15 channels.

RM5 X BC: Coinvalidator binary mode confida  

This coin mechanism is widely used on the automatic distribution market. As ‘Confida' binary validator RM5 is able to manage up to fifteen different coin values, or 59 different coins if they are redirected into the first fifteen channels. The first channel is used to tell the machine which type of communication needs to be used, if out of use, the validator uses a standard mode, if the machine is working it uses the ‘confida' combined mode.
Another channel is provided as a parity display to increase the security of the combinations emitted to the validator; this adjustment allows more communication lines to be activated, making it easier to identify false combinations.

RM5 X 0M: Coinvalidator  Multiimpuls  

This validator is used with the multimpulse mode and is able to manage up to 59 different coins if they are redirected into the first six channels.

RM5 X 10: Coinvalidator  with dual  price  totalizer

This coin mechanism is used as a dual price totalizer. Widely used on the automatic distribution market, the machine recognises 59 different coins with 59 different values, the total is given immediately and the inserted value is shown on a display. When the amount required is inserted a channel remains active until the warning reset sign appears.
With the portable programmer RM5-PROGRAMMER it is possible to activate or modify various options.

RM5 X 14: Coinvalidator with single price totalizer with internal reset  

This coin mechanism is used as a single price totalizer with internal reset. Widely used on the automatic distribution market, the machine recognises 59 different coins with up to 59 different values, on machinery that doesn't have a reset warning sign.
When the amount required has been inserted a channel remains active until the reset warning sign appears.
Using the portable programmer RM5-PROGRAMMER it is possible to activate or modify various options, including visualisation of cashed coins from zero to sale price and vice versa and modification of sales prices.

RM5 X FD: Coinvalidator Totalisator für Brunnen  

This coin mechanism is used as a single price totalizer with internal time reset. Widely used to manage fountains, the machine recognises 59 different coins which can have up to 59 different values, the total is given immediately and the inserted value is shown on a display. When the amount required has been inserted, a channel remains active until the reset warning sign appears.

Using the portable programmer RM5-PROGRAMMER it is possibile to activate or modify various options. Given identical prices, the channel for the second price will have a two second delay, time necessary for cup dispensing.

RM5 X 20 – CoinvalidatorTotalisator mit Kreditimpulsausgabe

This coin mechanism is widely used on the recreation market and is used as a credit pulse emission totalizer. It recognises 59 coins with up to 59 different values, the total is given immediately and the inserted value is shown on a display. It has been made to command automatically the videogame boards. It is possible to choose the cost of each game with up to 2 bonus levels.
An exit can be provided for direct command with an external meter to count cashed coins. With the portable programmer RM5-PROGRAMMER it is possible to activate or modify various options.
To make installation easier, a RM927 interface board is provided with a standard coin mechanism connector on one side and a 5 pole clamp on the other.

RM5 X 21: CoinvalidatorTotalisator mit Kreditimpulsausgabe mit möglichem Befehl an einen Trenner für die eingenommen Münzen

This coin mechanism is widely used on the recreation market and is used as a credit pulse emission totalizer . It can manage upto 59 different coin values and the total is given immediately. It can be used with a separator with reject mechanism.
IT has been made to command automatically the videogame boards. It is possible to choose the cost of each game with up to 2 bonus levels.

An exit can be provided for automatic command with an external meter to count cashed coins. With the portable programmer RM5-PROGRAMMER it is possible to activate or modify various options.
When the separator is not used, a RM927 interface board is provided with a standard coin mechanism connector on one side and a 5 pole clamp on the other, to make installation easier.

 

RM5 X 30: CoinvalidatorProgressiver Timer  

This coin mechanism is widely used in industry for services and is used as a “progressive timer” It recognises 59 coins with up to 59 different values, the total is given when a preset value is reached (basic service cost) a timed warning sign is given (basic service time). If more coins are added the sign increases in proportion to the value of coins added. A display shows the coins cashed until the base cost is reached, and after shows the time in minutes or seconds..
An warning sign is provided to signal remaining time; it is possible to regulate the time preset.

An entry signal is provided to block time, suspending the relative output. Eliminating this signal the coin mechanism reactivates its service and time count..
With the portable programmer it is possible to do the following operations: activate the sum of cashed coins, set service base cost, set minimum cost to add for extra time, determine time unit for calculation and visualisation, determine service time, set time warning signs, activate the economizer operations.

RM5 X 3R: Coinvalidator Progressiver Timer mit zeitgeschalteter Kreditausgabe nach Aufforderung  

This coin mechanism is widely used in industry, for services, and is used as a progressive timer with timed credit emission on request. It recognises 59 coins with up to 59 different values, the total is given and when a set value is reached (basic service cost) a timed signal is activated on request by the customer pushing a specific key. If more coins are added the signal increases in proportion to the value of the coins added.
A display shows the coins cashed until the base cost is reached, and after shows the time in minutes or seconds. A warning sign is provided to signal remaining time; it is possible to regulate preset time.
With the portable programmer it is possible to carry out the following operations: activate the calculation of cashed coins, set the service base cost, set minimum cost to add for extra time, determine time unit for calculation and visualisation, determine service time.

RM5 X 3C: CoinvalidatorProgressiver Timer mit Zählerausgang  

This coin mechanism is widely used in industry for services and is used as a “progressive timer” and can also be connected directly to an electromechanic counter, for auditing (given as multiple of the preset base value).
It recognises 59 coins with up to 59 different values, the total is given and when a set value is reached (basic service cost) a timed signal is activated (basic service cost). If other coins are added, the signal increases in proportion to the coins added.
A display shows the coins cashed until the base cost is reached, and after shows the time in minutes or seconds.
With the portable programmer it is possible to carry out the following operations: activate the calculation of cashed coins, set the service base cost, set minimum cost to add for extra time, determine time unit for calculation and visualisation, determine service time.

RM5 X 40: Coinvalidator Totalisator mit Kreditimpulsen nach Aufforderung  

This coin mechanism is widely used on the recreation market and has been manufactured especially for Kiddy Rides, billiards and other table games.
A totalizer with in request credit pulses; it recognises 59 coins with up to 59 different values, the total is given and when the credit cost is reached a signal is given on request by the customer, who by pushing a specific key can activate the reception of the coins and thus activate the function.
A display shows the coins cashed until the base cost is reached, accumulated credit an also be shown. When a display is not provided, credit is shown by the coin mechanism output.

This version offers an automatic command of an external counter of cashed coins.

With a portable programmer it is possible to carry out the following operations: set the cost of a single credit and two bonus levels, activate and read an internal counter of cashed coins, choose the type of signal emitted: pulse or fixed, regulate the duration, individually stops the coin acceptance channels.

RM5 X 60: Coinvalidator Totalisator mit zeitgeschalteten Kreditimpulsen nach Aufforderung  

This coin mechanism is widely used on the recreation market and has been manufactured especially for Kiddy Rides, billiards and other table games, redemption and boxing meter.
A totalizer with on request timed credit emission. It recognises 59 different coins with upto 59 different values, the total is given and when the credit cost is reached a signal (which can be regulated as desired)is given.

A automatic display shows cashed coins until a credit is reached, and then the number of credits accumulated then if on request a credit is used, it shows time. La gettoniera pilota direttamente un display che visualizza le monete inserite fino al raggiungimento di almeno un credito, poi il numero di crediti accumulati ed infine, se, a seguito di richiesta, viene consumato un credito, visualizza il trascorrere del tempo.
This version offers an automatic command of an external counter of cashed coins.

With a portable programmer it is possible to carry out the following operations: set the cost of a single credit and two levels of bonuses, activate and read an internal counter of cashed coins, choose the type of signal emitted: pulse or fixed, regulate the duration, individually stop the coin acceptance channels.

RM5 X 70: Coinvalidator Totalisator Einzelpreis bei Mehrfachverkauf für Fotokopierer  

This coin mechanism is widely used for photocopiers and is mainly used as a KEY-COUNTER. It is a single price multiple sale totalizer.

It accepts 59 coins with up to 59 different values. When it has received the value for at least one photocopy a signal is given to activate the machine. It can accumulate credit for more than one photocopy. After each cycle (each copy made) the photocopier shows credit used. When the last copy is done the machine stops. A display shows cashed coins up to the total credit and the number of copies done.
The cost of a single copy is detracted from the credit of cashed coins.
The coin mechanism also has an internal counter with an automatic counter of cashed coins.
By means of a potable programmer it is possible to carry out the following operations: set the cost of a single copy and two bonus levels, activate and read an internal counter of cashed coins, stop the working of single channels.

RM5 - T 1R

 
This type of coin mechanism gives the possibilty of buying distribution times on two exit lines; which means that two devices can be activated with a single payment system.
The user inserts the money coins (or tokens) and the value is accumulated.
The coin mechanism works both with alternate or continuous current and can guide a RM924 display.
Two inputs are available.
Some parameters can be configurated without the support of clone5 or the programmer, using two inputs and the display.
 

RM5 - T 32

Timer This type of coin mechanism gives the possibilty of buying distribution time on two exit lines; which means that two devices can be activated with a single payment system. The user inserts coins (or tokens) and the value is accumulated.
The coin mechanism works with alternate or continuous current and can guide a RM924 display.
Two inputs are available.
It is also possible to activate an anti-fraud device which, in an eventual tampering attempt, blocks the coin mechanism for a set time, then accumulated credit and time in progress return to zero and are cancelled.

 

HINT:  The version X 01 and X 21 are ident with the version X 00 and X 20, there is only the mode for the separator included.