Elektronischer Münzprüfer RM5 Handbuch Version english

RM5 Manual english - PDF laden ~ 349kB

SELF-PROG FUNCTION

The SELF-PROG function is very useful when you need to program a currency or a coin directly on the machines on

which they are installed, because the first six channels of the RM5 token dispenser can be reprogrammed without using

external devices. Besides programming the coin/token on the specific channel you may need to change other

parameters of the token machine, such as the assignment of values, in this case you need to use the Portable Calibrator

or the PC kit.

Programming the token or the coin on channel 6

• Put the 6 DIP-SWITCHES on "ON" when the machine is switched off.

• Switch the machine on and introduce 15 coins / tokens.

• Wait for the end-of-programming double "clack"

• Put the DIP switches on "OFF"

• Turn the token dispenser off and then back on

Programming the token or the coin on channels from 1 to 5

• Put the 6 DIP-SWITCHES on "ON" when the machine is switched off

• Switch the machine on and introduce 1 or 2 coins

• Leave the SWITCH of the channel to program on "ON"

• Introduce coins until you hear the end-of-programming double "clack"

• Put the DIP switches on "OFF"

• Turn the token dispenser off and then back on

NOTE: After this procedure the first two coins may be rejected.

With this operation the new calibration (coin/token) will maintain the previously set value. In the configuration

X 21, the credit will be the previously set game cost.

Ansicht auf 10 poligenAnschlußstecker Münzprüfer

Sonntag, 02. November 2014